ABIOTIC DEGRADATION OF IODOSULFURON-METHYL-ESTER IN AQUEOUS SOLUTION

The abiotic degradation of iodosulfuron-methyl-ester was investigated under both alkaline and acidic pH conditions in the dark, and results showed it to be a rather stable molecule in neutral or slightly alkaline environments. Photochemical reactions were studied using a high-pressure mercury arc lamp, and results showed that direct phototransformation is possible under normal environmental conditions (ì > 290 nm). High-performance liquid chromatography (HPLC-UV and HPLC-MS) analyses were used to identify the degradates and to study the kinetics of photodecomposition and hydrolysis. Five main products of iodosulfuron-methyl-ester degradation were tentatively identified, and one of them (4-methoxy-6-methyl-1,3,5-triazin-2-amine) was confirmed using an authentic standard. Among the phototransformation mechanisms, photosubstitution of the iodide atom by a hydroxyl group, photodissociation of the N-S bond, and photoassisted hydrolysis were observed. The quantum efficiencies (multiwavelength quantum yield) of the photodegradation under different conditions were determined, and values of 0.054 ( 0.02 (pH 9.6), 0.08 ( 0.02 (pH 7), and 0.044 ( 0.008 (pH 5.3) were obtained

From vertex detectors to inner trackers with CMOS pixel sensors

The use of CMOS Pixel Sensors (CPS) for high resolution and low material vertex detectors has been validated with the 2014 and 2015 physics runs of the STAR-PXL detector at RHIC/BNL. This opens the door to the use of CPS for inner tracking devices, with 10-100 times larger sensitive area, which require therefore a sensor design privileging power saving, response uniformity and robustness. The 350 nm CMOS technology used for the STAR-PXL sensors was considered as too poorly suited to upcoming applications like the upgraded ALICE Inner Tracking System (ITS), which requires sensors with one order of magnitude improvement on readout speed and improved radiation tolerance. This triggered the exploration of a deeper sub-micron CMOS technology, Tower-Jazz 180 nm, for the design of a CPS well adapted for the new ALICE-ITS running conditions. This paper reports the R&D results for the conception of a CPS well adapted for the ALICE-ITS.Comment: 4 pages, 4 figures, VCI 2016 conference proceeding

RcR_{c} measurements at LEP

The partial width $R_c = \Gamma(Z \to c\overline{c})$/$\Gamma(Z\to q\overline{q})$ is a basic observable in Z physics. Within the Standard Model its value is accurately predicted and other experimental measurements at LEP involve its knowledge. The DELPHI and OPAL collaborations have presented several Rc measurements. All methods are based on charmed hadron reconstructionand b/c separation. The LEP average, computed by the LEP Electroweak Heavy Flavor Working Group, is presented to be 0:1596 +- 0:0074. This is 1:8 standard deviation below the Standard Model expectation

Performance of the reconstruction algorithms of the FIRST experiment pixel sensors vertex detector

Hadrontherapy treatments use charged particles (e.g. protons and carbon ions) to treat tumors. During a therapeutic treatment with carbon ions, the beam undergoes nuclear fragmentation processes giving rise to significant yields of secondary charged particles. An accurate prediction of these production rates is necessary to estimate precisely the dose deposited into the tumours and the surrounding healthy tissues. Nowadays, a limited set of double differential carbon fragmentation cross-section is available. Experimental data are necessary to benchmark Monte Carlo simulations for their use in hadrontherapy. The purpose of the FIRST experiment is to study nuclear fragmentation processes of ions with kinetic energy in the range from 100 to 1000 MeV/u. Tracks are reconstructed using information from a pixel silicon detector based on the CMOS technology. The performances achieved using this device for hadrontherapy purpose are discussed. For each reconstruction step (clustering, tracking and vertexing), different methods are implemented. The algorithm performances and the accuracy on reconstructed observables are evaluated on the basis of simulated and experimental data

Photon detection with CMOS sensors for fast imaging

International audiencePixel detectors employed in high energy physics aim to detect single minimum ionizing particle with micrometric positioning resolution. Monolithic CMOS sensors succeed in this task thanks to a low equivalent noise charge per pixel of around 10 to 15 e-, and a pixel pitch varying from 10 to a few 10 s of microns. Additionally, due to the possibility for integration of some data treatment in the sensor itself, readout times of have been reached for 100 kilo-pixels sensors. These aspects of CMOS sensors are attractive for applications in photon imaging. For X-rays of a few keV, the efficiency is limited to a few % due to the thin sensitive volume. For visible photons, the back-thinned version of CMOS sensor is sensitive to low intensity sources, of a few hundred photons. When a back-thinned CMOS sensor is combined with a photo-cathode, a new hybrid detector results (EBCMOS) and operates as a fast single photon imager. The first EBCMOS was produced in 2007 and demonstrated single photon counting with low dark current capability in laboratory conditions. It has been compared, in two different biological laboratories, with existing CCD-based 2D cameras for fluorescence microscopy. The current EBCMOS sensitivity and frame rate is comparable to existing EMCCDs. On-going developments aim at increasing this frame rate by, at least, an order of magnitude. We report in conclusion, the first test of a new CMOS sensor, LUCY, which reaches 1000 frames per seco

Development of ultra-light pixelated ladders for an ILC vertex detector

The development of ultra-light pixelated ladders is motivated by the requirements of the ILD vertex detector at ILC. This paper summarizes three projects related to system integration. The PLUME project tackles the issue of assembling double-sided ladders. The SERWIETE project deals with a more innovative concept and consists in making single-sided unsupported ladders embedded in an extra thin plastic enveloppe. AIDA, the last project, aims at building a framework reproducing the experimental running conditions where sets of ladders could be tested

Study of the depletion depth in a frontside biased CMOS pixel sensors

Depletion of the sensitive volume for semiconductor based detectors is a key to achieve high performance. It is for instance required for charged particle detection in highly radiative environment and for X-ray spectroscopy. PIPPER-2 is a CMOS pixel sensor featuring an architecture that allows the application of the reverse bias of the pn junction from the frontside (cathode), on the electronic side, without process modification. Biasing voltages up to 45 V have been applied to sensor prototypes fabricated on two different high resistivity substrates: a thin epitaxial layer (1 kΩ cm) and a 40 μm thick bulk substrate (600 Ω cm). Calculations from a simplified analytical model and 3D-TCAD simulations were conducted to predict the evolution of the depletion depth with the bias voltage. These expectations were compared to measurements of PIPPER-2 illuminated with two X-ray energies. We conclude that the frontside biasing method allows the full-depletion of the thin epitaxial layer. In contrast, depletion of the bulk substrate reaches about half-depth but X-rays are still detected over the full depth

Performance study of a MegaPixel single photon position sensitive photodetector EBCMOS

International audienceThis development is related to the design and the integration of a Monolithic Active Pixel Sensor (MAPS) into a photosensitive proximity focusing vacuum-based tube. This EBCMOS project is dedicated to the fluorescent and the bioluminescent high speed imaging. The results of the full characterization of the first prototype are presented. Comparative tests with different fluorescent dyes have been performed in biology laboratories. Preliminary conclusions on the ability of EBCMOS to perform fast single-molecule tracking will be given